LIFT GATES - Anthony TruckUnder
Deluxe
Back to Anthony
Lift Gates
Quality Features back
to top
| Hydraulic System |
|
The closed hydraulic system
protects against outside contaminants and moisture. The lockable
steel pump enclosure protects components from damage by impact,
debris, and weather. Hingeless lid design eliminates corroded
hinge problems. |
| |
|
| Service-Free Bushings - An Anthony
First |
 |
Used at critical pivot points,
these bushings extend pin and arm life, while eliminating routine
lubrication and increasing resale value. |
| |
|
| Marine-Duty Control Switch |
 |
This switch operates reliably
under all types of weather conditions. Heat-shrink wire connections
and stainless steel terminal fasteners provide extra corrosion
protection, thus providing uninterrupted service in harsh weather
climates. |
| |
|
| E-Z Mount Installation |
 |
All Anthony ATU models are factory
assembled, tested, and energized to assure the highest quality
performance standards. They ship completely assembled on skids
for fast, clean, easy installation; and Anthony's pre-notched
center mark template ensures accurate placement of the floor
extension and precise spacing for all welds. E-Z Mount installations
provide the fastest installation times of any available models. |
| |
|
| Positive Electrical Connections |
 |
Anthony's heat-shrink siliconed
wire connections seal out moisture. Anti-rotation terminals
insure rugged circuit protection, and stainless steel fasteners
resist corrosion. |
| |
|
| Low Operating Pressure, Larger-Bore
Hydraulic Cylinder |
 |
The double-weight hydraulic
cylinder allows operation at a lower pressure to increase the
life of the entire hydraulic system, batteries, and electrical
components. The chrome-plated piston rod, piston cylinder wear
rings, and adjustable gland packing nut further extend Service-Free
operation. |
| |
|
| Anthony Exclusive, ZLC - Zero
Leak Concept |
 |
The use of machined fittings,
SAE "O" ring and JIC hydraulic connections, along
with factory installed -70º low pour hydraulic fluid, mean
you'll have long, trouble-free service with no aggravating and
costly leaks. |
Standard Features back
to top
Dual Driver Step Stirrups
Provide convenient assistance for mounting
and dismounting on left or right of truck.
Pressure Compensated Flow Valve
Provides constant and controlled lowering
speed of the platform, loaded or unloaded, and prevents platform
from "free-fall" under certain hydraulic failures.
Chrome Plated Piston Rod
Keeps exposed surface free from rust and
contamination to protect seals and extend cylinder life.
Piston Cylinder Wear Rings
Prevent scoring by maintaining piston/cylinder
wall tolerances.
Adjustable Gland Packing Nut on Cylinder
Allows adjustment of piston rod seal, extending
life of the seal.
Relief Valve
Prevents overloading during lifting cycle.
Low Operating Pressure
Extends service life of power unit, hoses,
cylinder seals and battery.
3/16" Formed Damond Tread Floor Extension
Provides rugged and attractive surface.
1/8" Industrial Diamond Tread Platform
Provides the largest standard platform in
the industry.
Spring-Assist Platform
Dual torsion springs provide easy opening
and closing. (Single spring on lowboy models.)
Heavy-Duty Sandwiched Hinge Plate
Maintains platform stability under heavy
load conditions.
Powder Coated Finish
Provides attractive, long-life protective
finish.
Adaptor Frame Mechanism-Lifetime Warranty
Against Rotational Wear Failure
Together with our 3 + 2 warranty on all parts
and labor.
Heavy-Duty 1/2" Steel Dock Bumpers
With rubber bumper pads to withstand "dock
shock".
Circuit Breaker - 150 Amp.
Protects truck wiring and power system in
the event of a "dead short".
Cab Cut-Off Switch
Protects liftgate from unauthorized use.
Yellow Di-Chromate Plated Pins
Used at all pivot points, these pins provide
long-life protection from rust, road salt, and moisture.
Available Models, Platforms
and Capacities back
to top
| Model |
Lifting
Capacity (lbs.) |
Bed Height
Min-Max |
Platform
Load Area and Ramp |
Shipping
Weight (lbs.) |
| ATU-1800-SF |
1,800 |
42"-57" |
80" x 38"
+ 5" |
903 |
| ATU-3000-SF |
3,000 |
42"-57" |
80" x 38" + 5" |
953 |
| ATU-1800PF-SF |
1,800 |
42"-57" |
80" x 38" + 5" |
903 |
| ATU-3000PD-SF |
3,000 |
42"-57" |
80" x 38" + 5" |
953 |
| ATU-1800A-SF |
1,800 |
45"-57" |
80" x 45" + 6" |
766 |
| ATU-1800LB-SF |
1,800 |
36"-57" |
72" x 32" + 5" |
880 |
| ATU-2500-SF |
2,500 |
42"-57" |
80" x 38" + 5" |
928 |
| ATU-3500-SF |
3,500 |
42"-57" |
80" x 38" + 5" |
953 |
| ATU-2500PD-SF |
2,500 |
42"-57" |
80" x 38" + 5" |
928 |
| ATU-3500PD-SF |
3,500 |
42"-57" |
80" x 38" + 5" |
953 |
| ATU-2500A-SF |
2,500 |
45"-57" |
80" x 45" + 6" |
791 |
| ATU-2500LB-SF |
2,500 |
36"-57" |
72" x 32" + 5" |
926 |
Options back
to top
- Hand-held control (on coiled cord) with plug
and socket
- Street-side control
- Steel guard for toggle switch control box
- P.T.O. drive
- 80" x 42" + 4" ramp platform
- Wireless hand-held remote control
- Flush-mount control inside van
- Recessed toggle switches
- Custom platforms and applications
- 80" x 42" +12" aluminum retention ramp
- Third step add-on extension for bumpers
- Lift-alert audible warning system
- 5 ton pintle hook bracket
- 102" wide floor extension
- 1/4" Heavy-duty floor extension
Mounting Requirements back
to top
|
