Quality Truck & Equipment Company Quality Truck & Equipment Company

Truck Bodies

GRAIN BODIES

Grain Rack Specifications

Rancher Special Platform Specifications

Contractor Rack Specifications


SETTING THE STANDARD FOR QUALITY TRUCK BODIES
Since 1946!


Sold Panel Grain with standard Rear.
(options Rears available)

Grain Rack with 10” Tip Tops


Optional Rear Doors

 


Triple Cargo Doors

Double Cargo Doors


Trash and Mulch Doors
   
GRAIN RACK SPECIFICATIONS
Heights: 42", 52"
Interior Length: 6" less than platform
Interior Width: 87 1/4" = 81 3/4"
96"       = 90 1/2"
Panel Skins: 42", 16 gauge rollformed
52", 14 gauge rollformed
Stakes: 14 gauge with liners
Rears: 42" - 2 wings, 39 5/8" x 32" high grain gate, 10" filler panel, bull bar
52" - same but with 20" filler panel
   
TIP TOP SPECIFICATIONS
Heights: 10"
Interior Length: 6" less than platform
Interior Width: 87 1/4"  =  81 3/4"
96"        =  90 1/2"
Panel Skin: 16 guage rollformed
Stakes: 14 gauge
Rears: 1 piece, full width

back to top


Rancher

Rancher Special Platform Specifications

Sizes:

8'3" x  84" - 92" - 96", 9' x  92" - 96" -  991/2", 10', 11', 12' x  96" or  99 1/2", 96" & 99 1/2" wide bodies are tapered at front for sleek style and appearance.  Square front optional.

Floor:

Treadplate, 12 gauge

Side Rail:

7" vertical face

Pockets:

3/16" formed steel to accommodate 2" x 4" lumber

Tie Rail:

3/8" x 2" steel segmented for ease in fuel fill installation

Crossmembers:

3" - 4.1# structural channel

Longsills:

5" - 6.7# structural channel

Headboard:

14 gauge smooth steel panel with 3" x 2" – 11 gauge rectangular tubing frame with louvered window;
39" high; 35" high on 8'3" x 84"

Rear Apron:

3/16" smooth steel

Gooseneck Hitch:

Recessed gooseneck hitch with safety chain loop standard, (ball not included) Atwood B-25 retractable ball assembly optional

Receiver Hitch:

3" x 4" x ¼" rectangular tubing frame with tube for 2" receiver hitch; safety chain loops; and tail light brackets

Lights:

Required lighting & marking per FMVSS108 installed

  Standard finish for platforms is black.

back to top


Contractor Rack

Contractor Rack Specifications
Drop Side Style
Lengths: 8', 10', 12', 14', 16', and 18'
Width: 96" OD    90" ID
Bulkhead: * 42" high 12 ga. formed steel panel
* 24" high x full width screened window
* 14 ga. formed steel stakes with liners
* Knee brace gusset kit
Sides * 14" high 12 ga. formed steel panel
* 14 ga. formed steel stakes
   Spring loaded latches at each end
   Forged butt hinge & pin with 1/4" thick strap hinge
Tail Gate: * 14" high 12 ga. formed steel panel
* 12 ga. formed steel vertical stiffeners
   2 1/2" x 2 1/2" x 12 ga. tube horizontal stiffener
*  Forged butt hinge & pin with 1/4" thick strap hinge
    3/16" rear rail cap
    Spreader chains
Corner Posts: 14" high 12 ga. formed steel
10 ga. corner cap with spring loaded latch pin/hinge
Inside stakes 14 ga. formed steel with liners
Tapered inside for easier material flow
Hardware *  All attaching hardware included
   

LIFT OUT STYLE

Lengths: 8', 9'6", 10', 12', 14', 16', 18' and 20'
Widths: 96" OD  90" ID  & 87 1/4" OD  81 1/4" ID
  Specifications marked with * from above apply

back to top

 

Quality Truck & Equipment Co.
P.O. Box 1425 • Bloomington, Illinois 61701
Toll Free: 1-800-678-2459 • Local: 309-662-5344 • Fax: 309-662-5409
Hours – M thru F 8am to 5pm
Sat 8am – Noon Central Time
Contact Us www.4QTE.com