★ FREE SHIPPING ON ALL ACCESSORIES ★
with purchase of any Snow Plow
FISHER SNOW PLOW ACCESSORIES
V-Plow Snow Plows
return to Fisher Snow Plow Product
Back Drag Edge Kit
Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging. (The back drag edge is not compatible with the use of a shoe kit.)
Part Number:
#44281-3 For 7' 6" Models -
Buy Today
#44282-3 For 8' 6" Models -
Buy Today
#44283-3 For 9' 6" & 10' 6" Models -
Buy Today
Curb Guard Kit - Cast Iron
Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.
Part Number:
#44406 For All Models -
Buy Today
Blade Stop Kit
Beef up your blade and prepare for extreme plowing conditions with genuine FISHER Blade Stops, designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams. This kit comes with all of the necessary hardware and instructions for easy installation.
Part Number:
#85263 For all models
10" Rubber Deflector
Dress up your blade and improve functionality with a genuine FISHER rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.
Part Number:
#44710 For All Models
Wing Extensions
Expand the carrying capacity of your XtremeV snow plow while cleaning up by adding a pair of genuine FISHER extension wings. These extension wings feature durable poly cutting edges which also function as a trip mechanism in the event that an obstruction is encountered. Wings extend at a 35° angle, increasing the effective plowing width by 12". (Not available for 7' 6" blades)
Part Number:
#44610-1 For 8' 6" & 9' 6" Models -
Buy Today
Cutting Edge - Carbide
Abrasive surfaces and increased plowing speeds, often found in municipal and commercial applications, can increase the wear rate of standard steel cutting edges. Combat high replacement cycles with FISHER Carbide Accessory Cutting Edge Kits for the 8' 6" and 9' 6" XtremeV.
Part Number:
#86887 For 8' 6" Models
#86885 For 9' 6" Models
Cutting Edge - Poly
Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with Poly Cutting Edge Kits for the 8' 6" and 9' 6" XtremeV.
Part Number:
#86881 For 8' 6" Models
#86878 For 9' 6" Models
Cutting Edge - Steel
Keep your blade at the top of its game by installing a genuine FISHER cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment. Hardware and center edges included.
Part Number for 1/2":
#44742-2 For 7' 6" Models
#44743-2 For 8' 6" Models
#44744-2 For 9' 6" Models
Part Number for 3/8":
#44740-2 For 7' 6" Models
#44741-2 For 8' 6" Models
Shoe Kit
Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation. (The shoe kit is not compatible with the use of a back drag edge.)
Part Number:
#50700 For All Models -
Buy Today
High Wear Shoe Kit
Improve blade float or reduce cutting edge wear rates with the new High Wear Shoe Kit. Composed of wear resistant AR400 material, these kits are less brittle, offer better wear rates than cast iron and are designed with aggressive municipal and commercial plowing applications in mind.
Part Number:
#86870 For All Models
Plow Parka
This heavy-duty FISHER branded nylon cover protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.
Part Number:
#26812-1 For All Models
Control Cup Holder Mount
The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.
Part Number:
#82006 For all models
Freeze Guard Grease
Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD Grease is available in cartridges, pails, totes and drums.
Part Number:
#72901 14oz. Cartridges
#72902 7 lb Pail
#72903 120 lb Tote
#72904 400 lb Drum
Wing Extensions
Expand the carrying capacity of your XV2™ snow plow by adding a pair of genuine FISHER extension wings. These extension wings feature durable poly cutting edges which also function as a trip mechanism in the event that an obstruction is encountered, the kit also includes a pair of blade stops for increased confidence while moving massive amounts of snow. Wings extend at a 60° angle, increasing the effective plowing width by 21". (Not available for 7' 6" and 10' 6" blades)
Part Number:
#43510-1 For 8' 6" & 9' 6" Models -
Buy Today
Shoe Kit
Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation. (The shoe kit is not compatible with the use of a back drag edge.)
Part Number:
#50700 For All Models -
Buy Today
Rubber Deflector
Dress up your blade and improve functionality with a genuine FISHER rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.
Part Number for 10":
#41812 For 7' 6", 8' 6" & 9' 6" Models
#86872 For 10' 6" Models
Part Number for 18":
#41813 For 7' 6", 8' 6" & 9' 6" Models
#86874 For 10' 6" Models
High Wear Shoe Kit
Improve blade float or reduce cutting edge wear rates with the new High Wear Shoe Kit. Composed of wear resistant AR400 material, these kits are less brittle, offer better wear rates than cast iron and are designed with aggressive municipal and commercial plowing applications in mind.
Part Number:
#86870 For All Models
Cutting Edge - Poly
Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with Poly Cutting Edge Kits for the 8' 6" and 9' 6" XtremeV.
Part Number:
#86881 For 8' 6" Models
#86878 For 9' 6" Models
Cutting Edge - Steel
Keep your blade at the top of its game by installing a genuine FISHER cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.
Part Number for 1/2":
#44742-2 For 7' 6" Models
#44743-2 For 8' 6" Models
#44744-2 For 9' 6" Models
Part Number for 3/8":
#44740-2 For 7' 6" Models
#44741-2 For 8' 6" Models
Part Number for 5/8":
#85361 For 8' 6" Models
#85362 For 9' 6" Models
#86891 For 10' 6" Models
Cutting Edge - Carbide
Abrasive surfaces and increased plowing speeds, often found in municipal and commercial applications, can increase the wear rate of standard steel cutting edges. Combat high replacement cycles with FISHER Carbide Accessory Cutting Edge Kits for the 8' 6" and 9' 6" XtremeV.
Part Number:
#86887 For 8' 6" Models
#86885 For 9' 6" Models
Curb Wear Kit
Curbing can come out of nowhere sometimes. Protect your blade with a pair of genuine FISHER curb guards. Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards will allow you to plow along curbs with confidence and precision, without damaging your blade.
Part Number:
#43885 For 7' 6", 8' 6" & 9' 6" Models
Curb Guard Kit - Cast Iron
Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.
Part Number:
#44406 For 7' 6", 8' 6" & 9' 6" Models -
Buy Today
Back Drag Edge Kit
Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging. (The back drag edge is not compatible with the use of a shoe kit.)
Part Number:
#44281-3 For 7' 6" Models -
Buy Today
#44282-3 For 8' 6" Models -
Buy Today
#44283-3 For 9' 6" & 10' 6" Models -
Buy Today
Blade Stop Kit
Beef up your blade and prepare for extreme plowing conditions with genuine FISHER Blade Stops, designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams. This kit comes with all of the necessary hardware and instructions for easy installation.
Part Number:
#85263 For all models
Commercial Blade Guide Kits
Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.
Part Number:
#26530K 24" for All Models
#51975 36" for All Models
Control Cup Holder Mount
The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.
Part Number:
#82006 For all models
Flex Arm Kit
This quick-release, flexible control mount adjusts into any position. The magnetic base allows for easy removal with no mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.
Part Number:
#62490 For all models -
Buy Today
Plow Parka
This heavy-duty FISHER branded nylon cover protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.
Part Number:
#26812-1 For All Models
Freeze Guard Grease
Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD Grease is available in cartridges, pails, totes and drums.
Part Number:
#72901 14oz. Cartridges
#72902 7 lb Pail
#72903 120 lb Tote
#72904 400 lb Drum
Rubber Deflector
Dress up your blade and improve functionality with a genuine FISHER rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.
Part Number:
#41812-1 For 7' 6" Model
Shoe Kit
Ideal for dirt or crushed stone surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER shoes are made of abrasion-resistant steel for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation.
Part Number:
#74519 For 7' 6" Model
Plow Parka
This heavy-duty FISHER branded nylon cover protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.
Part Number:
#26812-1 For All Models
Curb Wear Kit
Curbing can come out of nowhere sometimes. Protect your blade with a pair of genuine FISHER® curb guards. Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards will allow you to plow along curbs with confidence and precision, without damaging your blade.
Part Number:
#43885 For 7' 6" Model
Curb Guard Kit - Cast Iron
Protect the outer edge of your plow with these simple-to-install curb guards, made out of cast iron for robust wear-resistance. The rounded profile also helps to reduce damage to curbing and the blade. Sold individually, not as a set.
Part Number:
#44406 For 7' 6" models -
Buy Today
Cutting Edge - 1/2" Steel
Keep your blade at the top of its game by installing a genuine FISHER cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment. Hardware and center edges included.
Part Number:
#44742-2 For 7' 6" Model
Cutting Edge - Poly
Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with poly cutting edge kits.
Part Number:
#86866 For 7' 6" Model
Blade Stop Kit
Beef up your blade and prepare for extreme plowing conditions with genuine FISHER Blade Stops, designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams. This kit comes with all of the necessary hardware and instructions for easy installation.
Part Number:
#74528 For 7' 6" Model
Back Drag Edge Kit
Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging.
Part Number:
#44281-3 For 7' 6" Model -
Buy Today
Commercial Blade Guide Kits
Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.
Part Number:
#26530K 24" for All Models
#51975 36" for All Models
Flex Arm Kit
This quick-release, flexible control mount adjusts into any position. The magnetic base allows for easy removal with no mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.
Part Number:
#62490 For all models -
Buy Today
Control Cup Holder Mount
The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.
Part Number:
#82006 For all models
Dielectric Grease
Keep your FISHER plow running strong. Apply our specially formulated dielectric grease after each use to prevent corrosion caused by electrolysis and highly corrosive de-icing agents.
Part Number:
#22400K 2 oz tube
Freeze Guard Grease
Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD Grease is available in cartridges, pails, totes and drums.
Part Number:
#72901 14oz. Cartridges
#72902 7 lb Pail
#72903 120 lb Tote
#72904 400 lb Drum