★ FREE SHIPPING ON ALL ACCESSORIES ★
with purchase of any Salt / Sand Spreader
WESTERN SALT / SAND SPREADER ACCESSORIES
UTV Tailgate Spreaders
return to Western Snow Plow Product
LED Work Light Kit
See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one (see our Additional Work Light Kit, PN 99732-1).
Part Number:
#99505-1 For all models
Material Control Tube
Prevent leaking issues when using fine pellet and flake materials, such as many commercially available non-salt ice melt materials. The material control tube is a sleeve that holds the auger and prevents expensive, fine grain ice melt materials from uselessly leaking out as you drive down the road.
Part Number:
#75913 For PRO-FLO 525
UTV Spreader Control Shield
Keep your UTV spreader control protected from the elements with the UTV Spreader Control Shield. A molded, plastic “visor” attaches to the top of the UTV spreader control to protect it from the rain or snow.
Part Number:
#78585 For PRO-FLO 525
Control Cup Holder Mount
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN spreader controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle (image featuring plow control).
Now compatible with spreader controls using a Spreader Control Adapter Plate, order separately (#82018).
Part Number:
#82007 For All Models
Spreader Control Adapter Plate Kit
Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.
Control Cup Holder Mount not included, order separately (#82007).
Part Number:
#82018 For All Models
Dielectric Grease
Don’t risk corrosion problems—use WESTERN dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in tough winter snow, ice and salt conditions.
Part Number:
#49326 2 oz. Tube
Extreme Defense Grease
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.
Part Number:
#72909 EXTREME DEFENSE Grease, 14 oz cartridge
#72910 EXTREME DEFENSE Grease, 7 lb pail
#72911 EXTREME DEFENSE Grease, 120 lb tote
#72912 EXTREME DEFENSE Grease, 400 lb drum
Top Screen
The coated steel top screen helps break up large chunks of de-icing material during the loading process to help prevent clogging and bridging during spreader operation.
Part Number:
#95457 For 500 Model
Adjustable Deflector
Redirect material onto the roadway and away from your vehicle by using an adjustable deflector that can be positioned in various directions.
Part Number:
#95320 For 500 Model
5-Flight Auger
Reduce spillage of finer grained material by utilizing a 5-Flight Auger. A tighter corkscrew design with 5 turns over the same distance as the standard 3.
Part Number:
#P2028 For 500 Model
Control Cup Holder Mount
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN spreader controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle (image featuring plow control).
Now compatible with spreader controls using a Spreader Control Adapter Plate, order separately (#82018).
Part Number:
#82007 For All Models
Spreader Control Adapter Plate Kit
Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.
Control Cup Holder Mount not included, order separately (#82007).
Part Number:
#82018 For All Models
Dielectric Grease
Don’t risk corrosion problems—use WESTERN dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in tough winter snow, ice and salt conditions.
Part Number:
#49326 2 oz. Tube
Extreme Defense Grease
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.
Part Number:
#72909 EXTREME DEFENSE Grease, 14 oz cartridge
#72910 EXTREME DEFENSE Grease, 7 lb pail
#72911 EXTREME DEFENSE Grease, 120 lb tote
#72912 EXTREME DEFENSE Grease, 400 lb drum
Clear Weather Cover
The transparent cover keeps material dry and flowing freely, while offering a clear view inside the hopper.
Part Number:
#75925 For All Models
Wireless Vehicle Harness
Supplies a 7-wire connection to power the spreader. Use on applications where trailer wiring is not factory installed such as tractors and UTV's.
Part Number:
#75924 For the LOW-PRO 300W
Dielectric Grease
Don't risk corrosion problems—use WESTERN dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in the tough winter snow, ice and salt conditions.
Part Number:
#49326 2 oz. Tube
Extreme Defense Grease
Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE Grease. WESTERN's specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.
Part Number:
#72909 EXTREME DEFENSE Grease, 14 oz cartridge
#72910 EXTREME DEFENSE Grease, 7 lb pail
#72911 EXTREME DEFENSE Grease, 120 lb tote
#72912 EXTREME DEFENSE Grease, 400 lb drum
UTV Spreader Control Shield
Keep your UTV spreader control protected from the elements with the UTV Spreader Control Shield. A molded, plastic “visor” attaches to the top of the UTV spreader control to protect it from the rain or snow.
Part Number:
#78585 For DROP 250 & 600
Control Cup Holder Mount
Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN spreader controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle (image featuring plow control).
Now compatible with spreader controls using a Spreader Control Adapter Plate, order separately (#82018).
Part Number:
#82007 For All Models
Spreader Control Adapter Plate Kit
Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.
Control Cup Holder Mount not included, order separately (#82007).
Part Number:
#82018 For All Models
Side Extensions
1.5 and 2.0 cu ft extension collars are available as an accessory to increase material capacity for UTVs that can handle the additional weight.
Part Number:
#85698 2.5 cu ft Model Expands to 4.0 cu ft
#85698 6.0 cu ft Model Expands to 8.0 cu ft
LED Strobe Light Kit
Make sure you're seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you're seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.
Part Number:
#91815 For DROP 250 & 600
LED Work Light Kit
See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.
Part Number:
#91820 For DROP 250 & 600
Vibrator Kit
Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.
Part Number:
#76668 For DROP 250 & 600
Dielectric Grease
Don't risk corrosion problems—use WESTERN dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in the tough winter snow, ice and salt conditions.
Part Number:
#49326 2 oz. Tube
